CAC / BDP 40GXC Spezifikationen PDF herunterladen

5 3 D S --- 9 0 0 --- --- --- 1 1 7 ( 1 1 5 v )

5 3 D S --- 9 0 0 --- --- --- 1 1 8 ( 2 3 0 v )

Installation Instructions

Accessory Condensate Pump

fo r Du ctless S plit Sy stem

Coo ling Only and Heat P ump High Wall Units

(Size 009---036)

NOTE: Read and become familiar with these instructions before

beginning installation.

SAFETY CONSIDERATIONS

Improper installation, adjustment, alteration, service,

maintenance, or use can cause explosion, fire, electrical shock, or

other conditions which may cause death, personal injury, or

property damage. Consult a qualified installer, service agency, or

your distributor or branch for information or assistance. The

qualified installer or agency must use factory--authorized kits or

accessories when modifying this product. Refer to the individual

instructions packaged with the kits or accessories when installing.

Follow all safety codes. Wear safety glasses, protective clothing,

and work gloves. Use quenching cloth for brazing operations.

Have fire extinguisher available. Read these instructions

thoroughly and follow all warnings or cautions included in

literature and attached to the unit. Consult local building codes

and current editions of the National Electrical Code (NEC) NFPA

70. In Canada, refer to current editions of the Canadian electrical

code CSA 22.1.

Recognize safety information. This is the safety--alert symbol

When you see this symbol on the unit and in instructions or

manuals, be alert to the potential for personal injury. Understand

these signal words; DANGER, WARNING, and CAUTION.

These words are used with the safety--alert symbol. DANGER

identifies the most serious hazards which will result in severe

personal injury or death. WARNING signifies hazards which

could result in personal injury or death. CAUTION is used to

identify unsafe practices which would result in minor personal

injury or product and property damage. NOTE is used to

highlight suggestions which will result in enhanced installation,

reliability, or operation.

UNIT OPERATION HAZARD

Failure to follow this caution may result in unit failure

and/or damage.

Always follow instructions properly.

CAUTION

16’ Transparent

Suction Discharge Tubing

Condensate Pump

Assembly

Low Voltage

Power Cord

Transparent

Detection

Unit Vent Tubing

Detection Unit

5/8” Rubber Elbow

Detection Unit

Mounting Bracket

Wire Ties (6)

Mounting Bracket

Power Cable

Adhesive

A12227

Fig. 1 --- Accessory Condensate Pump Kit

Table 1—Accessory Condensate Pump Kit Contents

ITEM QTY

16---ft Transparent Suction/Discharge Tubing 1

Condensate Pump Assembly 1

L o w --- V o l t a g e P o w e r C o r d 1

Transparent Detection Unit Vent Tubing 1

Power Cable 1

Wire Ties 6

Wall Mount Bracket 1

Adhesive 1

Detection Unit Mounting Bracket 1

5/8--- in Rubber Elbow 1

Detection Unit 1

ELECTRICAL SHOCK HAZARD

Failure to follow this warning could result in personal injury

or death.

Before beginning any modification or installation of this kit,

be sure the main electrical disconnect is in the OFF position.

Ensure power is disconnected to the fan coil unit. On some

systems both the fan coil and the outdoor unit may be on the

same disconnect. Tag the disconnect switch with a suitable

warning label. There may be more than one disconnect.

WARNING

1 2 3 4 5 6 7 8 9 10

Inhaltsverzeichnis

Seite 1 - Installation Instructions

5 3 D S --- 9 0 0 --- --- --- 1 1 7 ( 1 1 5 v )5 3 D S --- 9 0 0 --- --- --- 1 1 8 ( 2 3 0 v )Installation InstructionsAccessory Condensate Pumpfo r D

Seite 2 - INSTALLATION

10CLEANING AND MAINTENANCEELECTRICAL SHOCK HAZARDFailure to follow this warning could result in personal injuryor death.Disconnect all power to unit t

Seite 3

2GENERALUse the two--part accessory kit (condensate pump and detectionunit) with high wall fan coils. The pump operates whenever thecondensate level i

Seite 4

38. Connect the other end of the low voltage power cord fromthe detection unit to the telephone jack socket in the pumpassembly.9. Cut the suction, tr

Seite 5 - PUMP ALARM BREAKS SIGNAL

4DETECTIONUNIT5/8" RUBBERHOSEDETECTION UNITMOUNTING BRACKETFAN COIL CONDENSATEDRAIN LINEDETECTIONUNIT VENT TUBINGSUCTION TUBINGLOW VOLTPOWER CORD

Seite 6 - PUMP POWERED FROM INDOOR UNIT

5WHTBRNYELBLU115-1-60 POWER REQUIRED FOR PUMP PUMP ALARM BREAKS SIGNALOUTDOOR UNITTERMINAL BLOCKA12135Fig. 8 --- 009, 012 (115--1--60) WIRING SCHEMATI

Seite 7

6WHTBRNYELBLU115-1-60 POWER REQUIRED FOR PUMP PUMP ALARM BREAKS SYSTEM POWERA12137Fig. 10 --- (115--1--60) WIRING SCHEMATICWHTBRNYELBLUPUMP POWERED FR

Seite 8

7BLUBRNWHTYELPUMP POWERED FROM INDOOR UNITPUMP ALARM BREAKS SYSTEM POWERA12139Fig. 12 --- (208/230--1--60) WIRING SCHEMATICBLUBRNYELWHTL2L1PUMP POWERE

Seite 9

8BLUBRNYELWHTL2L1PUMP POWERED FROM INDOOR UNITPUMP ALARM BREAKS SYSTEM POWERA12141Fig. 14 --- (208/230--1--60) WIRING SCHEMATICPump115-1-60LNALALL1L2S

Seite 10 - CLEANING AND MAINTENANCE

9Pump208/230-1-60L1L2ALALL1L2SIndoor Unit Terminal BlockGNDL1L2SL1L2Outdoor Unit Terminal BlockGNDField Power Wiring208/230-1-60LegendField Power Wiri

Kommentare zu diesen Handbüchern

Keine Kommentare

CAC / BDP 40GXC Spezifikationen

Stöbern Sie online oder laden Sie Spezifikationen nach Split-System-Klimaanlagen CAC / BDP 40GXC herunter. CAC / BDP 40GXC Specifications Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Split-System-Klimaanlagen CAC / BDP 40GXC